******* please make use of * or / if you add a commenting line 
*******************************************************
******* Types of Interface: 1 = PCISA, 2 = EPP (0x278),  3 = EPP (0x378)        
_Interface:  1
******* Directory for Data Storage:
_Directory: c:\arcdata
******* Test Center
_Center: Santa-Barbara
******* Operator(your name)
_Operator: SUSY
******* oject type[(0)hybrid, (1)hybrid with pa, (2) mmodule] 
_Test_object_type:  0
******* parameter settings for cuts
_testsettings_file_name: tob_ob2_testsettings_v1.xml
******* automated initialisation [(0)no, (1)yes] (don't forget to enter the board types and addresses
******* at the end of this config file)
_auto_init: 1
******* start operator modus(no interaction necessary)[(0)no; 1yes]
_operator_modus: 0
******* tell Lyon the number of your ARC board and your ARC FE adapter
******* and they will provide you with a tool_id with you have to enter here!
_tool_id: 4711
******* enter your center type [(0)hybrid test;1 gantry;2 bonding;3 module test]
_center_type: 0
******* You like to perform a cooling cycle? [(0) no, 1 yes]
_cooling_cycle:  0
******* enter the tests which should be marked if "select all tests" button in pushed in all tests
******* presently you can choose 25 different test on the all tests page so that 2^25-1=33554431 is max
_all_tests: 1
******* if you want to start now enter your board types and their address which is defined by the DIL switch
******* on every board; note ARC boards have 8, LED and HV boards have 9 digits
******* ARC 00000100 would be an ARC board where just bit 6 on your switch is set
******* note that you assign the ARC board with its DEPP and LED boards (arranging them directly one after the other)
_ARC:  00000100
_DEPP: 000000_110
_LED1: 000000_010